SONOFF AirGuard CO2 Monitor
R699,00
SPECIFICATIONS | |
|---|---|
| Protocol | Zigbee |
| Power | Battery |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
R599,00
Prices include VAT. Delivery shown at checkout.
The SONOFF SNZB-06P24 Zigbee presence sensor keeps a room marked occupied while someone sits still, not only when they walk.
10 in stock
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
The SONOFF SNZB-06P24 Zigbee presence sensor is a 24GHz mmWave occupancy sensor for rooms where a normal PIR keeps switching the lights off. A passive infrared sensor only sees a clear move. This one keeps emitting a microwave signal and watches the reflection change from small body movement and breathing, so a person reading, working, or sitting on the couch can still count as present.
Coverage is about 4 metres radially. SONOFF’s help centre lists a 110° detection angle. The user manual lists about 120°, and notes that narrow rooms can bounce the signal and widen the effective angle. The range is split into 7 distance zones. Turn a zone off to ignore a doorway, a passage, a fan, or a moving curtain, and leave the chair or desk zones on. That is the main way to cut false triggers.
A built-in ambient light sensor reports lux, so a scene can require both presence and low light before a lamp comes on. Bluetooth is used by the eWeLink app for local setup. Day-to-day control is Zigbee 3.0. There is no Wi-Fi radio and no battery. It must stay on USB-C power at 5 V / 0.5 A. Open-air Zigbee range is up to 100 m. Through walls it is shorter, so keep it inside a solid mesh of your other Zigbee devices.
The SONOFF SNZB-06P24 Zigbee presence sensor needs a hub or coordinator. Recommended SONOFF gateways include ZBBridge-P, NSPanel Pro, and ZBBridge-U, with iHost support on current firmware. In Home Assistant it pairs through Zigbee2MQTT or ZHA using a Sonoff dongle or another compatible coordinator. Voice routines on Alexa or Google Home only work through a supported hub.
Mount it on a desk, wall, or ceiling with the magnetic base, the adhesive pad, or screws. A height of about 1 to 2 metres usually gives the cleanest result. Avoid pointing it straight at fans, swinging signs, running water, or large metal surfaces. It is indoor only, rated from -10 °C to 60 °C and 0–90% relative humidity, non-condensing, below 2000 m altitude. It is not a fall detector, and a fully still or sleeping person is not detected as reliably as someone sitting and breathing toward the sensor.
Typical uses are keeping lounge or study lights on while you sit, holding a bathroom or passage light only while the room is actually occupied, and gating heating or a plug only when someone is in the room and the light level is low. Pair it with a door sensor or the SenseGuard siren if you also want an after-hours alert.
In the box: the Presence Core sensor, a magnetic base, and a user manual. A USB power adaptor is not included. A short USB-C cable is often packed, but check your carton. Factory reset is a long press of about 10 seconds until the LED flashes.
Specifications: model SNZB-06P24, SenseGuard Presence Core 24G, MCU TLSR8656, 24GHz mmWave, Zigbee 3.0 (IEEE 802.15.4), BLE for setup, detection about 4 m and 7 zones, lux sensor, USB-C 5 V / 0.5 A, 44.2 × 44.2 × 59 mm, 34.5 g, white PC+ABS, indoor, CE / FCC / RoHS.
Use the SONOFF SNZB-06P24 Zigbee presence sensor where you already run Zigbee and want still-person detection in a small room. It is not a whole-house map, and it will not run on a battery.
SPECIFICATIONS | |
|---|---|
| Protocol | Zigbee |
| Power | Battery |
Only logged in customers who have purchased this product may leave a review.
10 in stock
Reviews
There are no reviews yet.